Digital Asset Licensing & Intellectual Property

1. License grant and usage limits

• Personal use only: All digital assets, including STL files, 3D models, and design data, are licensed exclusively to the original purchaser for individual, non-commercial use.
• Prohibited distribution: You may not share, upload, resell, sublicense, or publicly distribute the digital source files or modified versions of them.
• No commercial manufacturing: Production of physical items from these files for sale, commercial gain, or corporate distribution is strictly prohibited. Legal corporate remedies will be pursued by Pademelon Performance Products PTY, Ltd.

2. Slicing parameters and printing baselines

To ensure structural integrity and correct part performance, execute your prints using the following baseline parameters:

• Material selection: High-performance engineering filaments only (PETG, ABS, ASA, or PA-CF recommended based on component exposure).
• Infill density: Minimum 30% infill utilizing gyroid or cubic patterns for multidirectional strength.
• Wall loops: Minimum 4 solid perimeter walls to handle mechanical stress points.
• Layer height: Maintained between 0.16mm and 0.20mm to secure functional design tolerances.

3. Fitment baselines and validation

• Hardware alignment: Verify all physical dimensions against your specific bike hardware configuration before final installation or trail testing.
• Liability disclaimer: Pademelon Performance Products PTY, Ltd. provides digital assets on an "as-is" basis. We assume no liability for component failures, mechanical damage, or personal injury resulting from user-slicing errors, printer variations, or structural material choices.